2.7.10 Search
Click button system goes to search interface. Please refer to chapter 2.10.1
2.7.11 Alarm Status
Click button system goes to alarm status interface. It is to view device status and
channel status. Please refer to chapter 2.12.2.
2.7.12 Channel Info
Click button , system goes to the channel information setup interface. It is to view
information of the corresponding channel. See Figure 2-38.
Figure 2-38
2.7.13 Remote Device
Click , system goes to an interface for you to view remote device information. Please
refer to chapter 2.10.3.1.
2.7.14 Network
Click , system goes to the network interface. It is to set network IP address, default gateway etc.
To Next Page
Loading...
