Figure 2-46
Now you can select one or more channel(s) and then click to search record(s). System
supports one or more channels. The window split mode can auto adjust according to the
channel amount.
System max supports 16-split. Click button to select all channels at the same time.
Click system begins playback.
2.10.5 Splice Playback
For the large record file, you can use splice playback function to play the same file in several
sections at the same time. It is very convenient for you to find the video footages you desire.
On the main menu, click Search button, or right click mouse and then select Search. You can
go to the Figure 2-41.
On the right pane, check the box to enable splice playback function, and then set channel,
date, split mode. The splice playback interface is shown as below. Each section has a small
triangle; you can adjust it to set time. See Figure 2-47.
Figure 2-47
Note
Select split mode, so that the record can be spliced in several sections.
Select splice file.
Click Playback, system playbacks from the first of current date by default.
Click time bar, system playbacks from the time you click.
Click , you can select on the file list.
To Next Page
Loading...
