3) Manual record function
It is to back up the video of current channel to the USB device. System cannot backup the
video of multiple-channel at the same time.
Click button , system begins recording. Click it again, system stops recoridng. You can
find the record file on the flash disk.
4) Manual Snapshot
Click to snapshot 1-5 times. The snapshot file is saved on the USB device or HDD. You
can go to the Search interface (chapter 2.10.1) to view.
5) Mute (For analog channel only)
Click to mute. Click again to enable audio function when
preview. Please note this function is for one-window mode
only.
6) Bidirectional talk (For digital channel only)
If the connected front-end device supports bidirectional talk function, you can click this
button. Click button to start bidirectional talk function the icon now is shown as
. Now the rest bidirectional talk buttons of digital channel become null too.
Click again, you can cancel bidirectional talk and the bidirectional talk buttons of other
digital channels become as
7) Remote device (For digital channel only)
Shortcut menu. Click it to go to the remote device interface to add/delete remote device or view its
corresponding information. Please refer to chapter 2.10.3.1 for detailed information.
2.6 Right-Click Menu
On the preview interface, right click mouse, you can view menu interface shown as in Figure 2-23.
Tips
After you go to the corresponding interface, right click mouse to go back to the upper-level.
To Next Page
Loading...
