2.12 Camera
For camera setting interface, please go to Main Menu Camera, see Figure 2-50.
Figure 2-50
2.12.1 Remote Device (For digital channel only)
2.12.1.1 Remote Device
In the main menu, from Camera Remote Device, you can go to an interface shown as in
Figure 2-51. Here you can add/delete remote device and view its corresponding information.
IP search: Click it to search IP address. It includes device IP address, port, device
name, manufacturer, type. Use your mouse to click the item name, you can refresh
display order. Click IP address, system displays IP address from small to large. Click IP
address again, you can see icon, system displays IP address from large to small. You
can click other items to view information conveniently. For the network device already
added to the device, you can see there is a small icon “*” after the SN in case there is
repeatedly add operation.
Add: Click it to connect to the selected device and add it to the Added device list.
Support Batch add.
You can see the corresponding dialogue box if all digital-channel has connected to the
front-end. System cannot add new device if the device you want to add has the same IP
and TCP port as the device in the list.
To Next Page
Loading...
