Figure 2-49
System only backup files with a √ before channel name. You can use Fn or cancel button to delete √
after file serial number.
Click Start button, system begins copy. At the same time, the backup button becomes stop
button. You can view the remaining time and process bar at the left bottom.
When the system completes backup, you can see a dialogue box prompting successful backup.
File format: Click the file format; you can see there are two options: DAV/ASF.
The file name format usually is: Channel number + Record type + Time. In the file name, the
YDM format is Y+M+D+H+M+S. File extension name is “.dav”.
Tips:
During backup process, you can click ESC to exit current interface for other operation. The
system will not terminate backup process.
Note:
When you click stop button during the burning process, the stop function becomes activated
immediately. For example, if there are ten files, when you click stop system just backup five
files, system only save the previous 5 files in the device (But you can view ten file names).
To Next Page
Loading...
