Show filter: You can use it to display the specified devices from the added device.
Edit: Click button or double click a device in the list, you can change channel setup.
Delete: Please select one device in the Added device list and then click to remove.
Status: means connection is OK and means connection failed.
Delete: Select a device on the Added device list, click Delete button, system disconnect
device first and then remove its name from the list.
Manual add: Click it to add the IPC manually. The port number is 25001. The default
user name is admin and password is admin.
Figure 2-51
Click the Manual Add button: you can go to the following interface. See Figure 2-52.
Channel number: The dropdown list here displays unconnected channel number. You
can go to Figure 2-51 to set remote channel connection.
Please note:
This series product supports the IPC from many popular manufactures such as Sony,
Hitachi, Axis, Samsung, Dynacolor, Arecont, ONViF and Dahua.
System default IP address is 192.168.1.240 if you do not input IP address. System will
not add current IP address.
To Next Page
Loading...
