You cannot add two or more devices in the Manual Add interface (Figure 2-52). Click
OK button, system connects to the corresponding front-end device of current channel on
the interface.
Figure 2-52
Show filer: It is to filter the searched device.
◼ None: it is to display all searched devices.
◼ IPC: It is to display all cameras.
◼ DVR: It is to display all storage devices such as NVR, DVR.
Change IP:
Click you can change the information such as IP address, subnet mask, and default
gateway, user name, password of the checked device. See Figure 2-53.
To Next Page
Loading...
