Figure 2-34
Please refer to the following sheet for detailed
information.
There are two periods in one day. You can set different
sharpness, brightness, and contrast setup for different
periods.
Check the box here to enable this function and then set
period time.
The value here is to adjust the edge of the video. The value
ranges from 0 to 100. The larger the value is, the clear the
edge is and vice versa. Please note there is noise if the value
here is too high. The default value is 50 and the
recommended value ranges from 40 to 60.
It is to adjust monitor window bright. The value ranges from
0 to 100. The default value is 50.
The larger the number, the bright the video is. When you
input the value here, the bright section and the dark section
of the video will be adjusted accordingly. You can use this
function when the whole video is too dark or too bright.
Please note the video may become hazy if the value is too
high. The recommended value ranges from 40 to 60.
To Next Page
Loading...
