mode and
channel
selection
pane.
In 1-window playback mode: you can select 1-16 channels.
In 4-window playback mode: you can select 4 channels according to
your requirement.
In 9-window playback mode, you can switch between 1-8 and 9-16
channels.
In 16-window playback mode, you can switch between1-16 and 17-32
channels.
In customized mode, you can select one or more channel(s) you want
to playback at the same time. See chapter 2.10.1.4.
• The time bar will change once you modify the playback mode or the
channel
option.
The card number search interface is shown as below. Here you can view
card number/field setup bar. You can implement advanced search.
Click it to go to mark file list interface. You can view all mark information of
current channel by time. Please refer to chapter 2.10.1.3 for detailed
information. Please note only the product of this icon supports mark
function.
• Double click it, you can view the picture/record file list of current day.
• The file list is to display the first channel of the record file.
• The system can display max 128 files in one time. Use the │and │
or the mouse to view the file. Select one item, and then double click the
mouse or click the ENTER button to playback.
• You can input the period in the following interface to begin accurate
search.
• File type: R—regular record； A—external alarm record: M—Motion
detect record.
• Lock file. Click the file you want to lock and click the button to
lock. The file you locked will not be overwritten.
• Search locked file: Click the button to view the locked file.
• Return: Click button , system goes back to the calendar and
channel
Play/Pause
There are three ways for you to begin playback.
⚫ The play buttons
⚫ Double click the valid period of the time bar.
⚫ Double click the item in the file list.
In slow play mode, click it to switch between play/pause.
To Next Page
Loading...
