the list. Then click the backup button, now you can see the backup
menu. System supports customized path setup. After select or create
new folder, click the Start button to begin the backup operation. The
record file(s) will be saved in the specified folder.
⚫ Check the file again you can cancel current selection. System max
supports to display 32 files from one channel.
⚫ After you clip on record file, click Backup button you can save it.
⚫ For one device, if there is a backup in process, you cannot start a new
backup operation.
• It is to edit the file.
• Please play the file you want to edit and then click this button when you
want to edit. You can see the corresponding slide bars in the time bar
of the corresponding channel. You can adjust the slide bar or input the
accurate time to set the file end time.
• After you set, you can click Clip button again to edit the second period.
You can see the slide bar restore its previous position.
• Click Backup button after clip, you can save current contents in a new
file.
• You can clip for one channel or multiple-channel. The multiple-channel
click operation is similar with the one-channel operation.
Please note:
⚫ System max supports 1024 files backup at the same time.
⚫ You cannot operate clip operation if there is any file has been checked
in the file list.
In any play mode, the time bar will change once you modify the search type.
⚫ When system is playing, you can select a zone in the window to begin
smart search. Click the motion detect button to begin play.
⚫ Once the motion detect play has begun, click button again will
terminate current motion detect file play.
⚫ There is no motion detect zone by default.
⚫ If you select to play other file in the file list, system switches to motion
detect play of another file.
⚫ During the motion detect play process, you cannot implement
operations such as change time bar, begin backward playback or frame
by frame playback.
⚫ Please refer to chapter 2.10.1.1 Smart Search for detailed operation.
Another
channel
synchroni
z ation
switch
to
play when
When playing the file, click the number button, system can switch to the
same period of the corresponding channel to play.
To Next Page
Loading...
