Figure 2-56
Select the import file and then click the OK button. System pops up a dialogue box to
remind you successfully exported. Please click OK button to exit.
Note:
If the imported IP has conflicted with current added device, system pops up a dialogue box to
remind you. You have two options:
OK: Click OK button, system uses the imported setup to overlay current one.
Cancel: Click Cancel button, system adds the new IP setup.
Important
You can edit the exported .CVS file. Do not change the file format; otherwise it may
result in import failure.
Does not support customized protocol import and export.
The import and export device shall have the same language format.
2.12.1.2 Channel Status
Here you can view the IPC status of the corresponding channel such as motions detect,
video loss, tampering, alarm etc. See Figure 2-57.
IPC status: : Front-end does not support. : Front-end supports. : There is
To Next Page
Loading...
