Figure 2-64
Important notice about UNI+ DVR series product:
Nowadays, there are mainly two analog signal types on today market: analog standard
definition (CVBS) and analog HD (CVI, AHD or Other). For UNI+ DVR series product,
each channel supports all types of signal connection (analog signal/IP signal). For
analog signal connection, the default setup is AUTO, that is to say, no matter what
analog signal (CVBS, CVI, AHD or other analog HD signal) connected; the UNI+ DVR
can automatically recognize the signal and display the proper image. There is no need
to set manually.
If the auto recognition error occurred, UNI+ DVR series product supports manual setup
too. The manual setup featuring high recognition speed and usually there is no error.
For example, in below (Reference Image) you can set channel 1 to connect to CVI
camera, channel 2 to connect to AHD camera, channel 3 to connect to CVBS camera.
To Next Page
Loading...
