Cradlepoint IBR600 - Page 143

CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 140
Automatically check for new firmware: (Default: selected) The modem will automatically check for firmware updates by
default.
Modem Connection Mode: Specify how the modem should connect to the network. Not all options are available for all
modems; this will default to Auto if an incompatible mode is selected.
• Auto (all modes): Let the modem decide which network to use.
• Auto 3G (3G or less): Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE.
• Force LTE: Connect to LTE only and do not attempt to connect to 3G or WiMAX.
• Force 3G (EVDO, UMTS, HSPA): Connect to 3G network only.
• Force 2G (1xRTT, EDGE, GPRS): Connect to 2G network only.
See the following tables for a breakdown of the technologies used with various CradlePoint COR models when any
Modem Connection Mode is selected.
CDMA Technology
Auto
Auto 3G
Force 4G
Force 3G (module auto selects)
Force 2G
(<= 3G)
LTE
1xEVDOAe
(EHRPD)
1xEVDO-A
(HRPD) (3G)
1xEVDO-0
(HRPD) (3G)
1xRTT
(2.5G)
IBR6x0LE
(Sierra Wireless MC7750)
✔
✔
✔
✔
✔
✔
✔
IBR6x0E
(Sierra Wireless MC5728v)
✔
----
----
----
----
----
----