Cradlepoint IBR600 - Redirector

CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 220
8.7 Serial Redirector
A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial device can
also be accessed by running "serial" from an SSH session.
8.7.1 Telnet to Serial Configuration
Enabled: Enabling Telnet to Serial will start a Telnet server that passes its connection to the serial adapter. Enabling this
service is not necessary when accessing serial through SSH.
LAN: Enable serial redirector for LAN
connections.
Authenticated LAN: Enable serial redirector
for Authenticated LAN connections. You
must be logged into the router to use the
redirector.
WAN: Enable serial redirector for WAN
connections.
Server Port: Enter a port number for the
redirector to use. (Default: 7218)
8.7.2 USB Serial Adapter Configuration
Baud Rate: Select from the dropdown list.
• 50
• 75
• 110
• 134
• 150
• 200
• 300
• 600