CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 166
Click Add to create a new NHRP interface.
• Enabled: Enabled or disable the interface.
• Name: Give the interface a unique name that matches
the mGRE (multipoint GRE) tunnel. Select from
configured GRE tunnels or input manually.
• Peer Authentication: Embeds the secret plaintext
password to outgoing NHRP packets. Incoming NHRP
packets on this interface are discarded unless this
password is present. Max length: 8 characters.
• Holding Time: Specifies the holding time for NHRP
registration requests and resolution replies.
• Shortcut-Destination: Reply with authoritative answers
on NHRP resolution requests destined to addresses in
this interface (instead of forwarding the packets).
• Non-Caching: Disables caching of peer information
from forwarded NHRP resolution reply packets.
• Shortcut: Enable creation of shortcut routes.
• Redirect: Enable sending of proprietary enterprise-style NHRP traffic indication packets.
To Next Page
Loading...
