CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 224
Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community
name.
Address for trap server: Enter the address of the host system that you want trap alerts sent to.
Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162)
NOTE: System information via SNMP is by default Read-Writable. However, if the value is set here, that field will become Read-Only.
System Contact: Enter in an email address.
System Name: Enter in the router’s host
name.
System Location: Enter in the physical
location of the router.
To Next Page
Loading...
