CRADLEPOINT MBR95 | USER MANUAL Firmware ver. 3.6.3
SYSTEM SETTINGS → ADMINISTRATION
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 113
6 = GPS quality indicator (0=invalid; 1=GPS fix; 2=Diff. GPS fix)
7 = Number of satellites in use [not those in view]
8 = Horizontal dilution of position
9 = Antenna altitude above/below mean sea level (geoid)
10 = Meters (Antenna height unit)
11 = Geoidal separation (Diff. between WGS-84 earth ellipsoid and mean sea level. -=geoid is below WGS-84 ellipsoid)
12 = Meters (Units of geoidal separation)
13 = Age in seconds since last update from diff. reference station
14 = Diff. reference station ID#
15 = Checksum
8.1.7 Syslog Settings
Enabling this option will send log messages to a specified Syslog server. After enabling, type the Hostname or IP address
of the Syslog server (or select from the dropdown menu).
Include System ID: This option will include the router’s "System ID" at the beginning of every log message. This is often
useful when a single remote Syslog server is handling logs for several routers.
To Next Page
Loading...
