Cradlepoint MBR95 - Page 22

CRADLEPOINT MBR95 | USER MANUAL Firmware ver. 3.6.3
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 20
You may have changed the administrator password during initial setup using the First Time Setup Wizard. Log in using
your personalized administrator password.
If you have forgotten your personalized password, you can reset the MBR95 to factory defaults. When you reset the
router, the administrator password will revert back to the Default Password. Press and hold the reset button on the
router unit until the lights flash (10 seconds). You can then log in using the Default Password.
4.1.1 Router Details
The Administrator Login page includes a section that shows the following Router Details:
Wireless Details
 Model Number: MBR95
 Status: Enabled/Disabled
 Clients: The number of attached users.
 Channel: The channel number.
 Name: The name of the primary network. If you have more than one wireless network enabled, the additional
network names will also be listed here.
Modem Details (These show if you have an attached USB modem.)
 Manufacturer: The name of the modem manufacturer (Pantech, Novatel, etc.).
 Model: The name of the modem model.
 Signal: The strength of the signal (dBm).