CRADLEPOINT MBR95 | USER MANUAL Firmware ver. 3.6.3
STATUS → DASHBOARD
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 34
Network Name: IP Address/Netmask
o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled.
o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.
To configure a network, see Network Settings → WiFi / Local Networks.
WiFi Networks: “Detailed Info” links to Network Settings → WiFi / Local Networks.
WiFi Radio: Channel: 1-11 for 2.4 GHz; 36, 40, 44, 48, 149, 153, 157, 161, or 165 for 5 GHz. Transmit Power
(Expressed as a percentage).
For each WiFi network, the following information is displayed:
SSID: Service Set Identifier, an identifier for a wireless network.
o Security: WPA2/WPA1/WEP Personal or Open; Isolated Clients
o Network: The name of the local network.
To configure WiFi network settings see Network Settings → WiFi / Local Networks.
5.2.1 Router Alerts
On the right side of the Dashboard page is a brief set of “Router Alerts” that state basic
information such as whether the router is running properly. This will inform you about the
availability of new firmware, for example.
Router Alerts includes links to the System Software page (for new firmware) and the
Connection Manager.
To Next Page
Loading...
