2
GENERAL SAFETY INSTRUCTIONS
EXTREME CAUTION SHOULD BE USED IN OPEATION ALL POWER TOOLS. KNOW
YOUR POWER TOOL, BE FAMILIAR WITHITS OPEARTION. READ THE OWNER’S
MANUAL AND PRACTICE SAFE USAGE PROCEDURES AT ALL TIMES.
◆CONNECT your machine ONLY to the matched and specified power source.
◆ WEAR SAFETY G LASSES, RESPIRATORS, HEARING PROTECTION and
SAFFTY SHOES when operating heavy machinery. Always wear safety glasses.
◆ DO not wear loose clothing or jewellery when operating machinery.
◆ A Safe Environment is important. Keep the area free of dust, dirt and other debris in
the immediate vicinity of the machine.
◆ BE ALERT! Do Not Use prescription or other drugs that may affect your ability or
judgments to safely use this machine.
◆ DISCONNECT the power source when changing tool bits and or any equipment.
◆ NEVER leave an operating tool unattended.
◆ ALWAYS keep blades, knives or bits sharp and properly aligned.
◆ ALWAYS keep all safety guards in place and ensure their proper function.
◆ ALWAYS make sure that any tools used for adjustments are removed before operating
the machine.
◆ ALWAYS secure your work with the appropriate clamps or vises.
◆ ALWAYS keep bystanders safely away while operating machinery.
◆ DO NOT change speed while spindle is running.
◆ 3-JAW CHUCK OR 4-JAW CHUCK MAX.SPEED 2000r/min
◆ THINK SAFELY. WORK SAFELY. Never attempt a procedure if it dose not feel safe or
comfortable.
To Next Page
Loading...
Need help?
General
