3
Extreme caution should be used when operating all power tools. Know your
power tool, be familiar with its operation, read through the owner’s manual
and practice safe usage procedures at all times.
ALWAYS read and understand the
user manual before operating the
machine.
CONNECT your machine ONLY to
the matched and specific power
source.
ALWAYS wear safety glasses
respirators, hearing protection and
safety shoes, when operating your
machine.
DO NOT wear loose clothing or
jewelry when operating your
machine.
A SAFE ENVIRONMENT is
important. Keep the area free of
dust, dirt and other debris in the
immediate vicinity of your machine.
BE ALERT! DO NOT use
prescription or other drugs that
may affect your ability or judgment
to safely use your machine.
DISCONNECT the power source
when changing drill bits, hollow
chisels, router bits, shaper heads,
blades, knives or making other
adjustments or repairs.
NEVER leave a tool unattended
while it is in operation.
NEVER reach over the table when
the tool is in operation.
ALWAYS keep blades, knives and
bits sharpened and properly
aligned.
ALL OPERATIONS MUST BE
performed with the guards in place
to ensure safety.
ALWAYS use push sticks and
feather boards to safely feed your
work through the machine.
ALWAYS make sure that any tools
used for adjustments are removed
before operating the machine.
ALWAYS keep the bystanders
safely away while the machine is in
operation.
To Next Page
Loading...
