4
GENERAL SAFETY RULES
WARNING!
Serious injuries can occur if proper
safety precautions are not followed.
READ ALL INSTRUCTIONS.
WORK AREA:
1. Children and visitors should be
kept at a safe distance away from
the work area.
2. Cluttered areas and workbenches
invite accidents, KEEP YOUR
WORK AREA CLEAN.
3. Use padlocks to prevent entry or
master switches to prevent
unauthorized startup. Remove
starter keys from the machine.
4. Do not use power tools in damp
or wet areas. Keep your work
area well lit.
PERSONAL SAFETY:
1. Refrain from wearing loose
clothing, gloves, neckties, rings,
or jewelry that may get caught in
the moving parts of machinery.
Protective hair covering and non
slip footwear is also
recommended.
2. WEAR SAFETY GOGGLES.
Prescription eyeglasses have
only impact resistant lenses, they
are NOT safety glasses.
3. Disconnect tools from the power
source when changing the blade,
accessories or performing any
maintenance in the machine.
4. Keep all guards in place and in
good working order.
5. Remove any adjusting keys and
wrenches. Form a habit of
checking for this before startup.
6. Keep proper footing, DO NOT
OVERREACH.
7. Always ensure the power switch
is in the off position before
connecting to the power source.
This will prevent accidental
startup.
8. Only use the recommended
accessories as noted in your
operation manual. Improper or ill
fitting accessories may cause
injury.
9. NEVER STAND ON THE TOOL.
10. Check for damaged parts. Any
damaged parts should be
carefully checked to determine if
it will operate and perform its
intended function, check for
alignment, binding or breakage of
moving parts or any other
conditions that affect its
operation.
To Next Page
Loading...
