Craftex CX200 - CX200 Features

5
MODEL CX200 – 10” TABLE SAW WITH RIVING KNIFE
As part of the growing line of Craftex woodworking equipment, we are proud to offer the
CX200 a 10” Table Saw with Riving Knife. The Craftex name guarantees Craft Excellence. By
following the instructions and procedures laid out in this user manual, you will receive years of
excellent service and satisfaction. The CX200 is a professional tool and like all power tools,
proper care and safety procedures should be adhered to.
Motor ..............................................3-HP, 220-V, Single Phase TEFC Motor
Drive System ..................................Triple “V” Belt Drive
Blade Guard ...................................Riving Knife, CSA Approved & UL897 Compliant
Miter Gauge....................................T-Slot Miter Gauge
Rip Fence .......................................“T” Type Heavy Duty Rip Fence (Cam Lever) w/Optical Cursor
Fence Size......................................Length 48” x Width 4-1/8” x Height 2-1/2”
Table Size.......................................Length 40” x Width 27” (with Extension Wings)
Floor to Table Height......................34”
Maximum Blade Diameter ..............10”
Riving Knife/Spreader Thickness....0.1”
Arbor Size.......................................5/8”
Arbor Speed ...................................4300 RPM
Maximum Width of Dado ................13/16”
Maximum Depth of Cut @ 90°........3-1/8”
Maximum Depth of Cut @ 45°........2-3/16”
Maximum Rip to Right of Blade ......30”
Maximum Rip to Left of Blade.........12”
Dust Collection Ports......................One 4” Port
Dimensions.....................................Length 62” x Width 41” x Height 40”
Approximate Weight .......................550 lbs.
CX200–10” Table Saw
FEATURES