Craftex CX200 - Page 9

9
CX200 & CX201
EXTENSION TABLE
Figure-3 Inventory
LIST OF CONTENTS QTY
S. Extension Wing (CX201)................. 1
T. Legs (CX201).................................. 2
U. Foot Pads........................................ 2
V. Extension Wing (CX200)................. 1
While doing inventory, if you can not find
any part, check if the part is already
installed on the machine. Some of the parts
come assembled with the machine because
of shipping purposes.
When setting up your machine, you will
want to find an ideal spot where your table
saw will most likely be positioned most of
the time. Consider your complete work
environment as well as working
comfortability with the table saw before
placing your machine in the ideal spot.
Figure-4 Minimum working space for
CX200 & CX201