To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.206933 and is the answer not in the manual?
General| Model Number | 113.206933 |
|---|---|
| Motor | Induction |
| Voltage | 120V |
| Maximum Cutting Depth | 1/8 inch |
| Feed Rate | 26 feet per minute |
| Type | Planer |
| Amperage | 15 Amps |
| Maximum Cutting Width | 12.5 inches |
| Knife Size | 12.5 inches x 1 inch x 1/8 inch |
Ensure all tools are properly grounded to prevent electric shock.
Always wear safety goggles with impact resistance for eye protection.
Ensure the switch is OFF before plugging in the tool.
Inspect parts for damage before further use to ensure proper function.
Turn power off and wait for the tool to stop before leaving.
Avoid kickbacks by holding work firmly and taking shallow cuts.
Use safety goggles, face shields, and ear protection as needed.
Important warnings regarding pulley speed, familiarity, and general dangers.
Guidelines for safely connecting the tool to a grounded power outlet.
Verify correct motor shaft rotation direction before operation.
Step-by-step guide for safely replacing the jointer blades.
Common motor problems and their solutions for the jointer-planer.
