To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 149.236222 and is the answer not in the manual?
General| Type | Benchtop Planer |
|---|---|
| Maximum Depth of Cut | 1/8 inch |
| Power Source | Electric |
| Maximum Width of Cut | 12.5 inches |
| Dust Port Size | 2.5 inches |
Ensuring proper grounding to prevent electric shock and the risks associated with electrical malfunctions.
Wear safety glasses with impact-resistant lenses for eye protection during operation.
Unplug tools before servicing, changing accessories, or mounting/re-mounting motors.
Always wear eye protection when operating the jointer-planer.
Limit depth of cut to 1/8 inch per pass for planing operations.
Never operate the jointer-planer without the cutter head guard in place.
Details on adjusting the depth of cut using the hand knob, including tension notes.
Overview of the fence and its adjustment for angled cuts, including tilt indicators.
Description of the cutter guard's operation, safety, and procedure for checking its function.
Procedure for setting the guard stop to limit cutter guard opening during operation.
Techniques for feeding workpieces smoothly against the fence and tables, including hand-over-hand.
Guidelines for using hold down/push blocks on narrow or thin workpieces for safety.
Instructions for performing beveling and chamfering operations using the adjustable fence.
Steps for safely replacing the timing belt on the jointer-planer.
Detailed procedure for replacing and adjusting the cutter blades for optimal cutting.
