To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113 and is the answer not in the manual?
General| Type | Benchtop Planer |
|---|---|
| Motor Type | Induction |
| Cutterhead Speed | 10, 000 RPM |
| Maximum Cutting Depth | 1/8 inch |
| Maximum Material Thickness | 6 inches |
| Motor Amperage | 15 Amps |
| Feed Rate | 26 ft/min |
| Maximum Cutting Width | 12.5 inches |
| Knife Size | 12.5 x 1 x 0.125 inches |
| Dust Port Size | 2.5 inches |
Advice on securing the machine to prevent tipping during operation.
Explanation of kickbacks and methods to avoid them during operation.
Specifies personal protective equipment requirements and safety practices.
Guidance on how to feed material through the jointer-planer safely and effectively.
Instructions on the proper use of hold down and push blocks for safety.
Step-by-step guide for removing and installing new cutter blades.
Instructions on how to hone and maintain the sharpness of cutter blades.
A guide to diagnosing and resolving common operational problems with the jointer-planer.
