To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.232210 and is the answer not in the manual?
General| Model Number | 113.232210 |
|---|---|
| Maximum Cutting Depth | 1/8 inch |
| Feed Rate | 26 feet per minute |
| Number of Blades | 2 |
| Voltage | 120V |
| Maximum Cutting Width | 12.5 inches |
| Horsepower | 1.5 HP |
| Amps | 15 Amps |
| Blade Length | 12.5 inches |
| Dust Port Size | 2.5 inches |
Pre-operation checks and warnings to prevent injury.
Safety precautions to follow while the tool is in operation.
Details voltage, circuit requirements, and motor cooling needs.
Specifies the correct wire gauge for extension cords to prevent power loss.
Lists parts and initial inspection procedures.
Step-by-step instructions for assembling the tool's legs and base.
Guides on installing the drive belt and setting proper tension.
Procedures for attaching the jointer base to the assembled legs.
Identifies and explains the machine's primary controls.
Overview of machine parts, controls, and their functions.
Core operational procedures, safety tips, and workpiece handling.
Techniques for feeding material safely and effectively.
Proper use of safety accessories for workpiece control.
Procedures for verifying knife installation and condition.
Steps for attaching the fence and safety guards to the machine.
General upkeep, cleaning, lubrication, and parts replacement.
Detailed instructions for removing and installing cutting blades.
Methods for honing and maintaining the sharpness of the knives.
Guidance on lubricating specific moving parts of the machine.
Common problems and their solutions for the jointer-planer.
Illustrated breakdown of all replaceable parts with part numbers.
