Need help?Do you have a question about the Craftsman 135.17240 and is the answer not in the manual?
General| Model Number | 135.17240 |
|---|---|
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| No Load Speed | 5000 RPM |
| Cord Length | 6 feet |
| Depth of Cut at 45 degrees | 1-3/4 inches |
| Depth of Cut at 90 degrees | 2-3/8 inch |
General safety tips for the work area and preventing accidents.
Electrical safety precautions, including plug types and grounding.
Personal safety measures, including dress code and alertness.
Guidelines for safe tool operation, adjustments, and storage.
Safety guidelines for tool servicing and using replacement parts.
Specific safety rules tailored for sabre saws operation.
Warnings about dust particles and explanations of tool symbols.
Diagram and labels identifying parts of Model No. 17240.
Diagram and labels identifying parts of Model No. 17241.
Table detailing blade thicknesses, stroke length, and cutting capacities.
Instructions for securely attaching T or U-shank sabre saw blades.
Instructions on how to open and close the blade storage compartment.
How to engage and disengage the lock-on button for continuous operation.
Adjusting blade speed using the trigger switch or speed dial.
General advice for efficient cutting, including material placement and speed.
Using the orbital control lever for different cutting modes on Model 17241.
Method for using a straightedge for precise straight cuts.
Technique for making internal openings in soft materials without pre-drilling.
Adjusting the saw's foot for bevel cuts at 0° or 45°.
Specific tips and safety precautions for cutting various metals.
Attaching and using the edge guide for straight and circle cuts.
Warnings and requirements for tool servicing by qualified personnel.
Information on tool lubrication and carbon brush maintenance.
Guidance on when and how to replace tool bearings.
Safe methods for cleaning the tool, including warnings about solvents.
Information on accessories available at local Sears stores.
Details on the selection of T or U-shank sabre saw blades.
Guidelines for selecting and using appropriate extension cords.
To Next Page