To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.224120 and is the answer not in the manual?
General| Model Number | 137.224120 |
|---|---|
| Type | Circular Saw |
| Power Source | Corded Electric |
| Voltage | 120V |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
| Bevel Capacity | 45 degrees |
| Depth of Cut at 45 degrees | 1-3/4 inch |
Details about the band saw's technical specifications and capabilities.
Essential safety precautions to follow before operating the band saw.
Information on power supply, grounding, and extension cord usage for safe operation.
Details on the required power source and motor specifications for the band saw.
Guidance on proper grounding procedures to prevent electrical shock hazards.
List of optional accessories recommended for use with the band saw.
Instructions for unpacking the band saw and verifying all parts are present.
Glossary of terms related to the band saw's components and operations.
Definitions of common woodworking terms relevant to band saw operations.
Step-by-step guide for assembling the table onto the band saw body and stand.
Instructions for securely attaching the band saw body to its leg stand assembly.
Guide for attaching the sawdust port assembly to the band saw housing.
Procedure for safely removing the saw blade from the band saw.
Step-by-step guide for safely installing a new saw blade.
Procedure for properly adjusting the tension of the saw blade for optimal performance.
Steps to ensure the saw blade runs true and centered on the wheels.
How to adjust the upper blade guides and support bearing for correct blade guidance.
How to adjust the lower blade guides to support the blade correctly.
How to adjust the lower blade support bearing for proper blade guidance.
How to operate the keyed on/off switch for safety and control.
General advice and techniques for performing various types of cuts safely.
Guidance on choosing the correct blade width and type for different materials.
Routine cleaning and upkeep procedures for the band saw.
Specific cleaning and maintenance tasks for the band saw itself, including tire care.
Maintenance procedures for the band saw's motor, including cleaning and lubrication.
Common motor problems and their solutions for the band saw.
Common operational problems and troubleshooting steps for the band saw.
