To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.228010 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Motor Power | 15 Amp |
| Blade Diameter | 10 inches |
| Max Cutting Depth | 3 inches |
| Model Number | 137.228010 |
| No Load Speed | 5000 RPM |
| Cord Length | 6 feet |
| Depth of Cut at 90 degrees | 3 inches |
| Bevel Capacity | 0 to 45 degrees |
| Table Size | 26 x 20 inches |
Provides essential safety precautions and guidance before operating the table saw.
Specifies the necessary power supply, circuit protection, and voltage for the table saw.
Explains the importance and procedure for grounding the table saw to prevent electric shock.
Provides step-by-step guidance for assembling the table saw and its stand.
Details the process of assembling the leg stand for the table saw.
Explains how to attach the table saw unit to the assembled leg set.
Step-by-step process for attaching the blade guard assembly to the saw.
Details how to align the blade guard splitter correctly with the saw blade.
How to properly align and adjust the rip fence for accurate cuts.
Detailed steps and safety precautions for performing ripping cuts on the table saw.
Lists common problems, their causes, and corrective actions for the table saw.
