To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.224140 and is the answer not in the manual?
General| Model Number | 137.224140 |
|---|---|
| Type | Circular Saw |
| No Load Speed | 5000 RPM |
| Blade Diameter | 7-1/4 inches |
| Bevel Capacity | 45 degrees |
| Depth of Cut at 45 degrees | 1-3/4 inch |
Important safety guidelines before operation.
Detailed safety precautions for band saw operation.
Power supply and motor specifications for safe operation.
Proper grounding procedures for electrical safety.
Recommendations for using extension cords safely.
List of optional accessories for the band saw.
Steps for unpacking and verifying all parts.
Glossary of terms related to the band saw.
Definitions of woodworking terminology.
Instructions for assembling the leg stand.
Steps to mount the motor and assemble the pulley system.
Connecting the main saw body to the leg stand.
Procedure for safely detaching the saw blade.
Procedure for correctly fitting a new saw blade.
Adjusting the table angle for bevel cuts.
Setting the table to a precise 90-degree position.
Properly setting tension for the saw blade.
Adjusting the upper blade guide for optimal performance.
Aligning upper guides and support bearing.
Adjusting the lower blade guide blocks.
Setting the lower blade support bearing.
Using the keyed switch for starting and stopping.
Guidelines and precautions for standard cutting.
Techniques for making curved cuts.
Method for cutting circular shapes.
Recommendations for choosing the right blade.
Ensuring smooth movement of the upper guide.
Cleaning and upkeep procedures for the band saw.
Maintenance of blade wheel tires.
Information on bearing lubrication.
Troubleshooting common issues with the band saw.
Diagnosing and resolving motor-related issues.
List of replacement parts for the band saw.
List of replacement parts for the leg stand.
Information on repair and service options.
Details of the product's warranty coverage.
