To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.224240 and is the answer not in the manual?
Details about the band saw's motor specifications, including power and speed.
Information on the type of drive belt used in the band saw.
Specifications for the maximum cutting depth and throat capacity.
Details on blade width and length specifications for the band saw.
Specifications for the band saw's table size and tilt capabilities.
Indicates if the band saw is equipped with dust collection.
The overall weight of the band saw.
Essential safety precautions and steps to take before operating the band saw.
Recommendations for using extension cords safely and correctly with the band saw.
Lists optional accessories that can be used with the band saw.
Instructions for unpacking the band saw and checking all included parts.
Detailed steps for unpacking the band saw components.
Definitions of specific terms related to the Craftsman band saw.
Definitions of common woodworking terms used in the manual.
Step-by-step guide for assembling the band saw and its components.
Instructions for assembling the closed stand for the band saw.
Details on installing and using the sawdust port for dust collection.
Instructions for assembling and mounting the band saw's table.
Procedures for installing and removing saw blades.
Information on using and storing the included miter gauge.
Steps for attaching brackets for convenient power cord storage.
Procedures for adjusting the band saw's table, including tilting.
Steps to set the table to a precise 90-degree angle.
Detailed instructions on how to tilt the band saw table to various angles.
Guide on adjusting blade tension for optimal performance and safety.
Instructions on how to adjust the blade tracking for proper alignment.
Steps for adjusting the upper blade guide assembly for correct blade support.
Instructions for adjusting the upper blade guides for proper support and clearance.
Details on adjusting the upper blade support bearing for optimal performance.
Instructions for adjusting the lower blade guides for proper support and clearance.
Details on adjusting the lower blade support bearing for optimal performance.
Fundamental steps for operating the band saw, including the power switch.
Guidelines and safety tips for performing general cutting operations.
Techniques and advice for cutting curves with the band saw.
Instructions on how to perform circle cuts using the band saw.
Guidance on choosing the correct blade width and type for different cutting tasks.
Instructions for changing the band saw's speed settings by adjusting the V-belt.
Information on cleaning, maintaining, and replacing blade wheel tires.
Maintenance and care instructions for the band saw's motor.
Details on lubrication requirements for the band saw's components.
General maintenance procedures for keeping the band saw in good condition.
Specific cleaning and maintenance tasks for the band saw itself.
Procedures for cleaning and maintaining the band saw's blade wheel tires.
Instructions for cleaning and maintaining the band saw's motor.
Information on lubrication requirements for the band saw.
Troubleshooting common problems related to the band saw's general operation.
Troubleshooting specific issues related to the band saw's motor.
General