Craftsman 137.218100 User Manual

Operator's Manual
CRFIFrXMFIN°
3.0 HP (Max. Developed)
10" Inch Blade
5000 R.P.M.
TABLE SAW
Model No.
137.218100
137.248100 / with Stand
TABLE SAW
CAUTION:
Before using this Table Saw,
read this manual and follow
all its Safety Rules and
Operating Instructions
• Safety Instructions
• Installation
• Operation
• Maintenance
• Parts List
• Espahol
Customer Help Line
1-800-843-1682
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit our Craftsman website: www.sears.com/craftsman
Part No. 13721810001

Craftsman 137.218100 Specifications

General

Brand	Craftsman
Model	137.218100
Category	Saw
Language	English

Summary

Product Specifications

Power Tool Safety

Table Saw Safety

Electrical Requirements and Safety

Power Supply Requirements and Protection

Details on the correct voltage, amperage, and circuit protection for operating the table saw safely.

Extension Cord Selection and Safety

Guidelines for selecting appropriate gauge and type of extension cords for safe and effective use.

Assembly and Adjustments

Workbench Mounting Procedure

Procedure for securely mounting the table saw to a workbench for stable operation and sawdust management.

Rip Fence

Blade Installation and Replacement

Step-by-step guide for safely installing or replacing the saw blade, including safety precautions.

Blade Guard Assembly

Table Extension Fence Installation

Instructions for installing the extension fence to support wider workpieces during ripping operations.

Adjustment Instructions

Rip Fence Parallelism Adjustment

Detailed steps for ensuring the rip fence is parallel to the blade for accurate and safe ripping cuts.

Miter Gauge Angle Calibration

90° and 45° Blade Stop Adjustments

Blade Parallelism to Miter Gauge Groove

Instructions for checking and adjusting blade parallelism to the miter gauge groove for accurate cuts.

Operation

Adjusting Blade Height

Performing Bevel Cuts

Table Extension Usage Guide

Cutting Operations

Safe Ripping Techniques

Detailed instructions on performing rip cuts safely using the rip fence and push stick.

Ripping Narrow Stock Safely

Safety advice and techniques for ripping narrow stock, emphasizing the use of push sticks.

Bevel Ripping Procedure

Crosscutting Techniques

Bevel Crosscutting Procedure

Compound Miter Cutting

Mitering Cuts Guide

Dado Cut Instructions

Maintenance

General Saw Maintenance

Blade Mechanism Adjustment and Check

Troubleshooting Guide