To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.218760 and is the answer not in the manual?
General| Model Number | 137.218760 |
|---|---|
| Category | Saw |
| Brand | Craftsman |
| Type | Table Saw |
| Arbor Size | 5/8 inch |
| Motor | 15 Amp |
| No Load Speed | 5000 RPM |
| Cord Length | 6 feet |
| Blade Diameter | 10 inches |
| Max Cutting Depth at 90° | 3 inches |
| Bevel Capacity | 45 degrees |
Details the terms and conditions of the one-year warranty.
Provides essential safety guidelines to follow before operating the table saw.
Details safety rules specifically for operating the table saw.
Explains the importance and process of grounding the table saw for safety.
Provides guidance on selecting and using appropriate extension cords.
Instructions for securely mounting the table saw to a workbench.
Emphasizes the importance of maintaining a clean and safe work area.
Details how to attach and adjust the blade raising handwheel.
Explains the attachment and adjustment of the blade tilting handwheel.
Instructions for installing and securing the rip fence.
Step-by-step guide on how to safely change the table saw blade.
Instructions for assembling and aligning the blade guard and splitter.
How to adjust the miter gauge for accurate 90-degree cuts.
Instructions for adjusting the rip fence to be parallel with the miter gauge groove.
How to adjust the indicator on the rip fence for accurate measurements.
Steps to adjust the positive stops for 90° and 45° blade angles.
How to adjust the blade tilt pointer to align with the scale.
How to ensure the blade is parallel to the miter gauge groove for accurate cuts.
Explains basic saw operations and the function of key controls.
Overview of ripping, crosscutting, and related techniques.
Detailed instructions and safety for various ripping operations.
Detailed instructions and safety for various crosscutting operations.
Instructions for using the dado insert and performing dado cuts.
How to attach wood facing to the rip fence for specialized cuts.
Covers routine cleaning, polishing, and care of the table saw.
Instructions for checking and adjusting blade raising and tilting mechanisms.
Guidance on lubricating moving parts of the table saw.
A guide to identifying and correcting common problems with the table saw.
Lists all part numbers, descriptions, and sizes for Figure A.
Lists all part numbers, descriptions, and sizes for Figure B.
Lists all part numbers, descriptions, and sizes for Figure C.
