To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.218240 and is the answer not in the manual?
Details the terms of the full one-year warranty for the table saw.
Lists electrical, performance, and physical specifications for the saw's motor and components.
Outlines crucial safety precautions, including explanations of warning and danger symbols.
Provides essential safety rules for using the table saw, focusing on blade guards, kickback, and workpiece handling.
Specifies power requirements, extension cord selection, and grounding instructions for safe operation.
Lists recommended accessories and the tools needed for assembling the table saw.
Visual guide to identify and lay out all the parts included with the table saw during unpacking.
Identifies and labels the various parts and controls visible on the front and rear of the table saw.
Instructions for assembling the saw's stand, unfolding, and setting it up for use.
Guides for mounting the saw, installing accessories, and adjusting blade and indicator mechanisms.
Instructions for installing and adjusting the rip fence and for changing the saw blade.
Steps for assembling the blade guard and installing table side extensions.
Procedures for adjusting the rear table extension and the rip fence for accurate cuts.
Adjusting positive angle stops and calibrating the blade tilt pointer for precise cuts.
Steps to ensure the saw blade is parallel to the miter gauge groove for accurate ripping operations.
Explains fundamental operations like blade height/tilt, ON/OFF switch, overload protection, and table extension use.
Step-by-step guide for performing ripping cuts safely, including rip fence and push stick usage.
Instructions for 90° and bevel crosscutting, mitering, and compound cuts, with safety measures.
Procedures for making dado cuts and using auxiliary fences for specific cutting tasks.
Covers routine cleaning, lubrication, and checks for maintaining the table saw's condition and performance.
Provides a guide to diagnose and resolve common problems encountered with the table saw's operation.
A detailed list of parts for Schematic A, including I.D., description, size, and quantity.
Exploded view diagram of Schematic A, illustrating the assembly and placement of various parts.
A detailed list of parts for Schematic B, including I.D., description, size, and quantity.
Exploded view diagram of Schematic B, illustrating the assembly and placement of various parts.
A detailed list of all parts specific to the saw's motor assembly.
Exploded view diagram of the motor assembly, showing the arrangement of individual components.
A detailed list of all parts specific to the saw's stand assembly.
Exploded view diagram of the stand assembly, showing the arrangement of individual components.
Provides a full-size drawing and material recommendations for constructing a safe push stick.
General