EasyManuals Logo

Craftsman 247.203723 User Manual

Craftsman 247.203723
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
SERVICE AND MAINTENANCE
WARNING
If the engine has been recently run, the engine, muffler and surrounding
metal surfaces will be hot and can cause burns to the skin. Exercise caution
to avoid burns.
WARNING
Before performing any maintenance or repairs, disengage the PTO (Blade
Engage Lever), engage the parking brake, stop the engine and remove the
key to prevent unintended starting.
WARNING
Before performing any type of maintenance/service, disengage all controls
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect spark plug wire and ground it against the engine to prevent
unintended starting. Always wear safety glasses during operation or while
performing any adjustments or repairs.
Follow the maintenance schedule given below. This chart describes service
guidelines only. Use the Service Log column to keep track of completed
maintenance tasks. To locate the nearest Parts & Repair Service Center or to
schedule service, simply contact 1-888-331-4569.
MAINTENANCE SCHEDULE
Interval Item Service Service Log
Before Each Use 1. Engine oil level
2. Muffler area and controls
3. Finger guard
1. Check
2. Clean
3. Clean
In the First Five Hours 1. Engine Oil 1. Change
Every 10 Hours 1. Hood/ Dash air vents
2. Battery terminals
3. Deck spindles and idler bracket
1. Clean
2. Clean
3. Lubricate
Every 25 hours 1. Air filter’s precleaner*
2. Air filter*
3. Mid steering arms, pivot shafts,
and axles
4. Front wheel bearings
5. Front deck wheels
1. Clean
2. Clean
3. Lubricate
4. Lubricate
5. Lubricate
Every 50 hours 1. Engine oil/ Oil filter
2. Muffler
1. Change/ Replace
2. Check
Annually 1. Air filter
2. Air filters pre-cleaner
3. Spark plug
4. Air cooling system*
5. Fuel filter
6. Steering Gears
7. Rear Wheels
1. Replace
2. Replace
3. Replace
4. Clean
5. Replace
6. Clean
7. Remove and grease axles
Before Storage 1. Hood/ Dash air vents
2. Battery terminals
3. Mid steering arms, pivot shafts,
and axles
4. Front wheel bearings
5. Front deck wheels
6. Deck spindles and idler bracket
7. Pedal pivot points
1. Clean
2. Clean
3. Lubricate
4. Lubricate
5. Lubricate
6. Lubricate
7. Lubricate
*Service more frequently under dusty conditions.Engine Maintenance

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Craftsman 247.203723 and is the answer not in the manual?

Craftsman 247.203723 Specifications

General IconGeneral
BrandCraftsman
Model247.203723
CategoryLawn Mower
LanguageEnglish

Related product manuals