Craftsman 875.199860 User Manual

IPROFESSIONAL I
Owner's Manual
Model No. 875.199860
1/2-in.Composite impact Wrench
Unpacking
When unpacking this product, carefully inspect for any damage that may have occurr_
during transit. Make sure any loose fittings, bolts, etc. are tightened before putting thi_
product into service.
WARNING: Please read and save these safety and operating instructions. Read carefully
before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instructions
for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
www.CRAFTSMAN.com

Craftsman 875.199860 Specifications

General

Brand	Craftsman
Model	875.199860
Category	Power Tool
Language	English

Summary

Unpacking the Impact Wrench

Features and Benefits

Product Specifications

Important Safety Instructions

General Operational Safety

Read all instructions, wear eye/hearing protection, avoid vibration, use correct pressure, and handle hoses properly.

Pressure and Chemical Safety

Adhere to 90 PSI maximum and be aware of California Prop 65 chemical warnings.

Setup and Operation

Air Tool Hook Up

Diagram and instructions for connecting air hoses, lubricator, regulator, and filter.

Operating the Impact Wrench

Instructions for adjusting the power regulator and controlling direction (FW/REV button).

Maintenance and Parts

Lubrication Procedures

Guidance on using in-line lubricators and lubricating the impact mechanism and air motor.

Exploded View and Parts List

Detailed diagram and list of all replacement parts for the impact wrench.

Troubleshooting Guide

Tool Not Operating Correctly

Addresses issues like grit, no oil, low air pressure, and air leaks.

Impact Mechanism Issues

Solutions for slow or no impact, including lubrication and mechanism wear.

Moisture in Tool

Guidance on draining water from the tank, air lines, and installing separators/dryers.