EasyManua.ls Logo

Craftsman 875.501390 User Manual

Craftsman 875.501390
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CRRFTSMRN
Owner's Manual
3 Ton Service Jack
Model No.
875.501390
WARNING:
Before operating jack, read
this manual and follow all
Safety Recommendations and
Operating Instructions.
# Safety
# Warranty
Features & Operation
# Maintenance
# Espafiol
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA pL-50139
Question and Answer IconNeed help?

Do you have a question about the Craftsman 875.501390 and is the answer not in the manual?

Craftsman 875.501390 Specifications

General IconGeneral
BrandCraftsman
Model875.501390
CategoryPower Tool
LanguageEnglish

Summary

Safety Instructions

Read Operating Instructions

Study manual before operating. Failure may cause damage or injury.

Position the Jack

Lift only on vehicle areas specified by the manufacturer.

Use Support Stands

Always use support stands after lifting before working on the vehicle.

Do Not Overload Jack

Do not exceed rated capacity to prevent damage or failure.

Use on Hard Level Surface

Use jack only on hard level surfaces to prevent instability.

Center Load on Jack Saddle

Center load before lifting to prevent load loss or damage.

Release Hydraulic Air

Steps to release trapped air from the hydraulic system.

Warranty Information

Craftsman Jacks One Year Warranty

Full one-year warranty for non-commercial use from date of purchase.

Product Description

Service Jack Specifications

Model 875.501390 jack features 6000 lbs capacity and 5.5-19.75 inch lift range.

Features and Operation

Maximum Load Capacity

The jack has a maximum load capacity of 6000 lbs.

Compact Design

Allows use in confined spaces for convenience and accessibility.

Raising the Jack

Steps for safely lifting a vehicle using the jack.

Lowering the Jack

Procedure for safely lowering a lifted vehicle.

Maintenance Procedures

Add Hydraulic Oil

Instructions for adding oil to the jack's hydraulic system.

Replace Hydraulic Oil

Procedure for draining and refilling the jack's hydraulic oil.

Lubrication

Apply lubricating oil to all moving parts as needed.

Rust Prevention

Check and clean ram/plunger for rust and corrosion.

Specifications and Parts List

Load Capacity and Lift Range

Details max load capacity and lift range of the service jack.

Jack Dimensions and Weight

Provides the physical size and weight of the service jack.

Service Jack Parts Identification

Identifies components and part numbers for the 3-Ton Service Jack.

Troubleshooting

Jack Lifting Issues

Common problems like not lifting or holding load, with causes and solutions.

Troubleshooting Spanish

Common problems in Spanish like not lifting or holding load, with causes and solutions.

Related product manuals