EasyManua.ls Logo

Craftsman WS210 - User Manual

Craftsman WS210
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
769-22930 / 00 08/19
ELECTRIC START CAPABLE 2-CYCLE GAS TRIMMERS
DESBROZADORAS DE GAS DE 2 TIEMPOS CON CAPACIDAD PARA ARRANQUE ELÉCTRICO
OPERATOR’S MANUAL | MANUAL DEL OPERADOR
WC210 | WS210
CMXGTAMD25CC | CMXGTAMD25SC
1-888-331-4569 WWW.CRAFTSMAN.COM
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.

Table of Contents

Questions and Answers

  • C
    Christopher NealAug 7, 2025
    Why won't my Craftsman Trimmer start?
    • J
      Jennifer SharpAug 8, 2025
      If your Craftsman Trimmer engine won't start, several factors could be the cause. The fuel tank might be empty, so fill it with properly-mixed fuel. You may also need to press the primer bulb 10 times or until fuel is visible. If the engine is flooded, move the choke lever to Position 3, press the throttle lockout, squeeze the throttle control, and pull the starter rope until the engine starts. Old or improperly mixed fuel can also prevent starting; drain the tank and add fresh fuel. Lastly, a fouled spark plug can be the culprit, so replace it.
  • S
    Sherri HallAug 12, 2025
    How to fix a Craftsman Trimmer that will not idle?
    • J
      Jennifer AbbottAug 12, 2025
      If your Craftsman Trimmer will not idle, here are a few things to check: * The air filter might be dirty. Clean or replace it. * The fuel might be old (over 30 days) or improperly mixed. Drain the fuel tank and add fresh, properly-mixed fuel. * The idle speed might be incorrect. Adjust the idle speed.
  • M
    megan66Aug 18, 2025
    What to do if the cutting head on my Craftsman Trimmer will not advance line?
    • M
      Mary GlassAug 18, 2025
      If the cutting head on your Craftsman Trimmer isn't advancing the line, several issues could be the cause. The cutting head might be bound with grass, so stop the engine and clean it. Alternatively, the cutting head could be out of line, requiring you to refill it with new line. The inner reel might be bound up, so clean the inner reel and outer spool. A dirty cutting head can also cause this, so open it and remove any welded sections. If the line is welded, rewind it. If the line is twisted, stop the unit, push the bump knob, and pull the line until 4 inches (102 mm) extends outside the cutting head. Lastly, if not enough line is extended, clean and thoroughly dry the cutting head.
  • J
    johnbennettAug 22, 2025
    Why is the cutting line advancing uncontrollably on my Craftsman Trimmer?
    • K
      Kimberly BenjaminAug 22, 2025
      If the cutting line on your Craftsman Trimmer is advancing uncontrollably, it's likely due to oil, cleaner, or lubricant being present in the cutting head. To resolve this, clean and thoroughly dry the cutting head.
  • K
    Kristina GarrettAug 27, 2025
    Why does my Craftsman Trimmer engine lack power or stall?
    • D
      David MartinAug 27, 2025
      Your Craftsman Trimmer engine might lack power or stall due to several reasons. The fuel may be old (over 30 days) or improperly mixed; in this case, drain the fuel tank and add fresh, properly-mixed fuel. A dirty air filter can also cause this issue, so clean or replace it. Additionally, a fouled spark plug could be the problem, requiring replacement.
  • J
    Julia ClarkSep 1, 2025
    What to do if my Craftsman Trimmer engine will not accelerate?
    • B
      Brandi ShafferSep 1, 2025
      If your Craftsman Trimmer engine won't accelerate, it could be due to a few reasons. First, check if the fuel is old (over 30 days) or improperly mixed; if so, drain the fuel tank and add fresh, properly mixed fuel. Another cause could be that the cutting head is bound with grass; stop the engine and clean the cutting head. Lastly, a dirty air filter can also prevent acceleration, so clean or replace the air filter.

Summary

Safety Information

Important Safety Instructions

Read All Instructions Before Operating

Safety Warnings for Gas Units

Critical precautions for flammable gasoline and explosion risks.

While Operating Safety

Guidelines for safe operation, including protective gear and handling.

Other Safety Warnings

Unit Handling and Storage Safety

Maintenance and Repair Safety

Product Specifications

Technical Specifications Data

Assembly: Cutting Head Shield

Installing Shield for WC210

Installing Shield for WS210

Attaching and Detaching Accessories

Installing an Attachment via Coupler

Removing an Attachment from Coupler

Fuel and Oil Mixing Instructions

Fueling the Unit Safely

Precautions and steps for safely adding fuel to the tank.

Gasoline and Oil Ratio

Explains the 40:1 mixing ratio and provides a table for different volumes.

Starting and Stopping the Trimmer

Starting Procedure

Step-by-step guide for starting the engine using primer and choke.

Stopping the Engine

Instructions on how to safely turn off the unit.

Operation and Usage Tips

Proper Unit Holding Technique

Adjusting Trimming Line Length

How to extend the trimmer line using the bump head.

Maintenance Schedule and Tasks

Replacing Trimming Line

Instructions for installing new trimmer line, including line type and length.

Installing New Trimming Line

Detailed steps for threading new line into the cutting head.

Trimming Line Removal and Cleaning

Removing Old Line or Obstructions

Steps to clear old line or blockages from the cutting head.

Engine Maintenance Procedures

Cleaning and Oiling the Air Filter

Guide to cleaning the air filter for optimal engine performance.

Adjusting Idle Speed

Spark Plug Maintenance

Steps for inspecting, cleaning, gapping, and replacing the spark plug.

Cleaning and Storage

Long-Term Storage Preparation

Troubleshooting Common Issues

Engine Start and Idle Problems

Solutions for when the engine won't start or idle correctly.

Engine Power and Acceleration Issues

Fixes for lack of power, stalling, or acceleration problems.

Cutting Head and Line Issues

Solutions for line advancement, welding, or entanglement problems.

Ordering Parts and Service

Contact Information

Craftsman WS210 Specifications

General IconGeneral
Engine25cc 2-cycle
Line Diameter0.095 inches
Fuel TypeGasoline
Start TypePull start
Power SourceGas
Shaft TypeStraight
Cutting Swath17 inches
TypeString Trimmer

Related product manuals