Craig CHT912 - Mounting on the Wall

2.1. Mounting on the wooden wall
You should use
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill through the EVA with screw directly into the marks that you have made on the wall.
3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
4
You may use
2.2. Mounting on the wall
2 pieces of plastic tubes
(Included)
2 pieces of short screws
(Included)
2 pieces of EVA
(Included)
2 pieces of short screws
(Included)
2 pieces of EVA
(Included)
Meijer.com