Craig CVD512a User Manual (English)

Questions and Answers:

C
ccummingsAug 22, 2025
How to fix Craig CVD512a remote control not working?
- D
  Dustin HoffmanAug 22, 2025
  If your Craig DVD Player remote control isn't working, first, replace the batteries, as they might be weak or dead. If that doesn't work, make sure the batteries are installed correctly, matching the polarity markings inside the battery compartment. Ensure that you are aiming the remote at the sensor from a distance within 15 feet and that there are no obstacles blocking the path of the beam.
N
Natalie WilliamsSep 2, 2025
Why are the subtitles not working correctly on my Craig DVD Player?
- L
  Larry FitzgeraldSep 3, 2025
  If subtitles are not working properly on your Craig DVD player, turn the subtitle on. If this does not work, the function may not be available on the current disc; try other discs.
R
robertslauraSep 1, 2025
What to do if my Craig CVD512a DVD Player powers on but isn't working right?
- M
  Madison WashingtonSep 1, 2025
  If your Craig DVD player powers on but isn't functioning properly, the issue could be due to: * Condensation: Unplug the unit and wait one to two hours until it is dry. * Wrong disc type or a corrupted disc: Try other discs. * A dirty or incorrectly inserted disc: Clean the disc and insert it with the label side up.
K
Kelly WrightAug 31, 2025
What to do if my Craig DVD Player has no picture or sound?
- M
  Mr. Brian SanfordAug 31, 2025
  If your Craig DVD player has no picture or sound, try the following: * Ensure the connection cables are correctly installed by reinstalling them. * Verify the video output setting by pressing the VIDEO button repeatedly until the picture appears correctly on your TV. * Make sure that the TV is turned on.
A
Andrew KennedyAug 30, 2025
Why is the Craig CVD512a remote control not working?
- W
  William RamosAug 30, 2025
  If the remote control for your Craig DVD player isn't working, here are a few things to check: * The batteries may be weak or dead: Replace them. * The batteries may be installed incorrectly: Check the polarity markings inside the battery compartment and reinstall them correctly. * The remote may not be aimed at the sensor: Aim the remote directly at the sensor on the DVD player. * You may be too far away: Operate the remote within 15 feet of the player. * There may be an obstacle in the path of the beam: Remove any obstacles between the remote and the player.
J
Joshua DavenportAug 28, 2025
What to do if subtitles are not working properly on Craig CVD512a DVD Player?
- K
  Kari SullivanAug 29, 2025
  If subtitles are not working properly on your Craig DVD player, ensure that subtitles are turned on. If the issue persists, the function may not be available on the current disc, so try other discs.
S
Sara ReyesAug 27, 2025
Why Craig CVD512a DVD Player has no power?
- R
  Roy AndersonAug 27, 2025
  If your Craig DVD player has no power, ensure that the small plug from the provided AC/DC adapter is inserted into the DC IN Jack on the rear of the player, and that the AC/DC adapter is plugged into a working AC outlet.
N
Nicole GarzaAug 26, 2025
What to do if Craig DVD Player power is on, but unit not functioning properly?
- M
  mhillAug 27, 2025
  If your Craig DVD player is powered on but not functioning properly, condensation may have formed inside the unit. Unplug the unit and wait about one to two hours until the player is dry. If the problem persists, the disc may be corrupted or of the wrong type, so try other discs. Also, the disc may be dirty or inserted incorrectly, so clean the disc and reinsert it with the label side up.
A
anthonymillerAug 25, 2025
Why my Craig DVD Player does not start playback?
- P
  Pamela MillerAug 26, 2025
  If your Craig DVD player isn't starting playback, make sure the DVD is correctly inserted with the label side up. Also, confirm that you are using a playable disc by trying other CD or DVD discs. Ensure the disc is placed correctly on the disc tray and that the disc is clean.
B
Brenda DavisAug 25, 2025
What to do if my Craig CVD512a has no picture and/or no sound?
- C
  Christian PalmerAug 25, 2025
  If your Craig DVD player shows no picture or sound, ensure that the connection cables are correctly installed. Also, check if the video output setting of the player is properly configured by pressing the VIDEO button repeatedly until the correct picture appears on the TV. Finally, confirm that the connected TV is powered on.

Craig CVD512a Specifications

General

Brand	Craig
Model	CVD512a
Category	DVD Player
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Electrical Safety and Laser Precautions

Covers 'DO NOT OPEN' and 'LASER SYSTEM' warnings for user safety.

Environmental, Cord, and FCC Warnings

Addresses rain/moisture, accessory use, long cord, and FCC compliance notices.

General Safety Precautions

Water, Cleaning, Ventilation, and Heat Rules

Details safe usage around water, cleaning methods, ventilation, and heat sources.

Power, Cord, Accessories, and Cart Usage

Covers plug safety, power cord protection, accessory use, and cart safety.

Servicing, Power Source, and Line Safety

Guides on servicing, power source type, and outside power line precautions.

Additional Safety Guidelines

Overloading, Liquid Entry, and Antenna Grounding

Warns against overloading, liquid entry, and explains antenna grounding requirements.

Service, Damage, Mounting, and CATV Notes

Covers servicing needs, damage conditions, wall mounting, and CATV installation.

Handling and Environmental Safety

Disc Handling, Player Location, and Cleaning

Provides guidance on handling discs, placing the player, and cleaning the unit.

Moisture Condensation Risks and Prevention

Explains the risks of moisture condensation and how to prevent damage.

About Discs

Disc Types and Playback Compatibility

Details playable disc formats and compatibility information.

Copyright and Region Management

Outlines copyright laws and region-specific playback restrictions.

Location of Controls

Front Panel Controls and Indicators

Identifies the buttons and indicators on the front of the DVD player.

Rear Panel Connections and Jacks

Details the various output and input jacks on the rear panel.

Remote Control Features

Remote Control Button Identification

Explains the function of each button on the remote control.

Battery Installation and Remote Operation

Battery Installation and Precautions

Instructions for installing batteries and important precautions for use.

Remote Control Sensor and Range

Information about the remote control sensor's operating angle and distance.

Connecting to TV

AV (Video/Audio) Connection Setup

Guide for connecting the player to a TV using AV cables.

YUV Connection Setup

Guide for connecting the player to a TV using YUV (Component) cables.

DVD Playback Operations

Basic DVD Playback and Navigation

Steps for powering on, inserting discs, and basic playback controls.

Special Playback Modes (GOTO, Repeat)

Details on using GOTO, Repeat Chapter, Repeat Title, and A-B Repeat functions.

Programming DVD Playback

Setting Up a DVD Program Sequence

Instructions for programming custom playback sequences for DVDs.

Programming CD/MP3/Photo Discs

Creating Playlists for CDs and Media Files

Guide for programming playback order for CD, MP3, and Photo discs.

Advanced Playback Functions

Audio, Subtitle, Menu, and Title Selection

Operations for selecting audio tracks, subtitles, menus, and titles.

On-Screen Display, Zoom, Angle, and Mute

Functions for displaying information, zooming, changing angles, and muting sound.

Video Output, Volume, and Track Selection

Settings for video output, volume adjustment, and L/R audio track selection.

CD and Media Disc Playback

CD Playback Procedures

Steps for playing back audio CDs and basic controls.

MP3/JPEG File Playback and Repeat

How to play MP3 and JPEG files and use the repeat function.

System Setup: Language and Video

Language, Aspect Ratio, and View Mode Settings

Configuration for display language, TV aspect ratio, and view modes.

TV System and Video Output Configuration

Setting the TV system (NTSC/PAL) and video output format.

System Setup: Audio and Configuration

Audio Setup and Night Mode Adjustment

Adjusting audio settings, including the Night Mode feature.

System Setup: Security and Preferences

Parental Control, Password, and Rating Levels

Setting up parental controls, changing passwords, and selecting rating levels.

Default Settings, Screen Saver, and Last Memory

Resetting settings, enabling screen saver, and managing last memory.

Care and Maintenance

Disc Handling and Cleaning Best Practices

Guidelines for safely handling, cleaning, and storing discs.

Unit Cleaning and Maintenance Tips

Instructions for cleaning the DVD player's exterior and maintaining its finish.

Troubleshooting Common Issues

Problem Diagnosis and Resolution Steps

Common issues with the DVD player and their corresponding solutions.

Product Specifications

Technical Details: Power, Discs, and Audio

Specifications for power source, supported discs, and audio output.

Pickup Specifications and Included Accessories

Details on the laser pickup and a list of included accessories.

Limited Warranty and Service Information

Warranty Coverage and Exclusions

Information on the product's warranty period, terms, and limitations.

Obtaining Service and Contact Details

Instructions on how to get service and contact customer support.

Related product manuals

Craig CVD512a User Manual

Table of Contents