Crane Source Space Vector SV100 User Manual

35
2.3.3 Drive Operation Checks
1. Test drive with an unloaded hoist.
2. Make sure the hoist electric motor brake is operating properly.
3. Run the hoist or traverse, and verify its correct operation in relation to direction of
movement versus pendant button pressed.
4. Check all limit switches for correct operation.
If the drive operates incorrectly please follow the troubleshooting charts of this manual, or
contact your SpaceVector Dealer for further assistance.
TM

Crane Source Space Vector SV100 Specifications

General

Brand	Crane Source
Model	Space Vector SV100
Category	Controller
Language	English