Crane Source Space Vector SV100 User Manual

70
5.2.13 Upload / Download from Keypad and Set Factory Defaults
F22: Parameter Read from Main Memory to Keypad
Range:0: Inactive (Factory Default: 0:Inactive)
1: Active
F23: Parameter Write from Keypad to Main Memory
Range:0: Inactive (Factory Default: 0:Inactive)
1: Active
By setting F22 Active, all drive data, including fault history, will be uploaded to the
Electronically Programmable Read Only Memory (EPROM) of the keypad. This can
be a useful way to store drive status at the time of fault.
By setting F23 to Active, all drive data stored in the keypad will be downloaded to
the drive. This can be a useful option when copying a set of parameters from one
drive to another.
F24: Initialize Parameters by Factory Settings
Range: 0: Inactive (Factory Default: 0:Inactive)
1:Active
If set to Active, the factory initial parameters will be downloaded to the drive.

Crane Source Space Vector SV100 Specifications

General

Brand	Crane Source
Model	Space Vector SV100
Category	Controller
Language	English