Why is the air flow reduced in my Crane EE-5067 Air Cleaner?
The reduced airflow in your Crane Air Cleaner may be caused by blocked intake and outlet grills. Ensure these are free of any obstructions or debris. Also, check the washable filter to see if it needs cleaning, and inspect the HEPA filter to determine if it requires replacement.
What to do if the Crane EE-5067 Air Cleaner does not operate?
First, ensure the filter is correctly inserted and the base cover is securely screwed into place. An automatic safety shut-off switch is activated if the filter is missing. Next, confirm that the air purifier is set to LOW, MED, or HIGH. Finally, check that the power cord is properly plugged into a working power outlet.
General| Timer | Yes |
|---|---|
| Noise level | - dB |
| Air purify rate | - m³/h |
| Number of speeds | 4 |
| Timer duration (maximum) | 8 h |
| Timer duration (minimum) | 2 h |
| Suitable for room area up to | 250 m² |
| Product color | White |
| Built-in display | No |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (max) | 45 W |
Weight and Dimensions| Depth | 164 mm |
|---|---|
| Height | 321 mm |
Emphasizes that the air purifier is for adult use only and children should be supervised.
Covers safe use of power cords, extension cords, and polarized plugs.
Identifies buttons on the air purifier's control panel.
Identifies main parts of the air purifier unit like air outlet and intake.
Identifies the washable particle and HEPA filter.
Captures initial dust and allergen particles, extends HEPA filter life.
True HEPA filter removes 99.97% of particles as small as 0.3 microns.
Instructions for cleaning the washable particle filter with water.
Instructions for cleaning the exterior and grills of the air purifier.
Guidelines for storing the air purifier in a dry location.
To Next Page
