AFTER SALES SUPPORT
1800 465 070
22
service@actionspares.com.au
MODEL: S002391 PRODUCT CODE: 14498 06/2020
How To Use The Console Display (cont)
Display Function
No. Item
Display
range
Setting
range
Memory RZ Description
1 TIME 0:00~99:99
±1
minute
Yes Yes
1. If without setting ,time will be accumulated in cycle.
2. If user has preset the value, it will count down from the preset
value to zero.
3. If there is no signal input for 4 minutes, the console will enter into
the standby mode.
2
TIME/500
M
0:00~99:99 No Yes Yes
In START status: If there is sensor signal input for 3s,it will display the
value. And counts the time to run 500m with current speed.
3 DISTANCE 0~99.99
0.5~99.50
±0.5KM
Yes Yes
1. If without setting , the value will be accumulated in cycle.
2. If user has preset the value, it will count down from the preset
value to zero.
3. If there is no signal input for 4 minutes, the console will enter into
the standby mode.
4 CALORIES 0~9999 cal
0~9990
(±10)
Yes Yes
1. If without setting , the value will be accumulated in cycle.
2. If user has preset the value, it will count down from the preset
value to zero.
3. If there is no signal input for 4 minutes, the console will enter into
the standby mode
5 SPM 0~999 No No Yes
In START status:
a. If there is sensor signal input for 3s, it will display the value.
b. If there is no sensor signal input for 4s, after 6s, the value will
return to zero.
c. Display the value and represent the average strokes in every
minute.
6 Strokes 0~9999
0~9990
(±10)
Yes Yes
1. If there is sensor input, it will count the current the number of 2.
STROKES and TOTAL STROKES share the same display window. So
they switch display in every 5 seconds.
7
Total
Strokes
0~9999 No Yes No
Count the total strokes.STROKES and TOTAL STROKES share the
same display window. So they switch display in every 5 seconds.
8 Scan No No No No
In SCAN mode, the functions :STROKES-TIME-DISTCAL- PULSE will
display in sequence and switch display in every 5s in the same
windows.
9 Stop No No No No
If there is sensor signal input, the console can quick start. If there is
no sensor input in 6s, the console will enter into the standby mode.
To Next Page
Loading...
