Need help?Do you have a question about the Crate VTX200 and is the answer not in the manual?
General| Power Output | 200W |
|---|---|
| Effects | Reverb |
| EQ | 3-band (Bass, Mid, Treble) |
| Outputs | Line Output |
| Footswitch | Channel Switching |
| Speakers | 2x12 inches |
| Speaker Configuration | 2x12 inches |
Essential warnings and guidelines for safe operation and maintenance of the amplifier.
Details on controls for Channel 1, featuring a low gain FlexWave circuit for clean sounds.
Details on controls for Channel 2, featuring a medium gain FlexWave circuit for distortion.
Details on controls for Channel 3, featuring a high gain FlexWave circuit for extreme distortion.
Explains the Mute switch for silent tuning and the electronic tuner operation.
Describes the controls for selecting and adjusting digital effects and delay parameters.
Details the Save/Tap button for tempo and preset saving, and the Reverb control.
Information on power connection and how to connect speakers to the amplifier.
Details on connecting external effects processors using stereo and mono loops.
Describes the jack for connecting the footswitch for remote control functions.
Comprehensive list of available effects, their descriptions, and Save/Tap button controls.
Comprehensive list of available delay effects, their descriptions, and Save/Tap button controls.
Procedure for saving user-defined DSP settings to the amplifier's memory.
Procedure for resetting DSP presets back to factory defaults.
Detailed explanation of the Save/Tap button's use for tempo and saving.
Describes how to use the footswitch for channel selection and DSP preset management.
Explanation of the two DSP preset banks accessible via the footswitch.
Details of the first three factory presets for Clean, Rhythm, and Solo sounds.
Details of the next three factory presets focusing on Clean, Rhythm, and Solo sounds with reverb.
Visual guides for achieving specific tones like "Oceanic", "Super Funk", and "Arena".
Further examples of suggested settings for "Haze Faze", "Solo Wah", and "Octanator" tones.
Printable templates for users to record their custom DSP settings.
Visual representation of the amplifier's internal signal path and component connections.
Details on power requirements, physical dimensions, and the amplifier's weight.
Specifications for input impedance, maximum input signal, and control ranges.
To Next Page
