Creality HALOT-MAGE PRO - USB Disk Printing - Slicer; Slicer Software Usage

12. USB Disk Printing
1. Slicer
1. Open the slicer software of HALOT BOX, click "Open" on the
top left of the screen and add model file;
2. If the model needs to add support, click the upper left icon①
to set corresponding parameters②
4. wait for slice to be finished→Select "Local Printing" to save
the sliced file.
3. Click icon ①→Setting slice printing parameters②→Click
Note: The published UI of slicing software shall prevail for the interfaces of HALOT BOX, and CHITUBOX.
0114
①
①
②
②
①
②
HALOT-MAGE PRO
HALOT-MAGE PRO
HALOT-MAGE PRO
HALOT-MAGE PRO