Need help?Do you have a question about the Creality HALOT-ONE PLUS and is the answer not in the manual?
Prepare 3D models using slicing software like HALOT BOX, Lychee Slicer, or CHITUBOX.
Transfer sliced files via USB disk and initiate the printing process on the device.
Prepare 3D models using slicing software like HALOT BOX, Lychee Slicer, or CHITUBOX.
Transfer sliced files via USB disk and initiate the printing process on the device.
General| Layer Resolution | 0.01 - 0.2 mm |
|---|---|
| Layer Thickness | 0.01 - 0.2 mm |
| Connectivity | USB |
| Leveling | Manual |
| Supported Materials | 405nm UV Resin |
| Light Source | UV LED |
| Power Supply | AC 100-240V |
To Next Page