14
10. Creality Cloud Online
Note: The UIinterface is for reference only,and shall be subject to the actual UI.
Make sure WiFi is correctly connected before using online printing
Steps: Settings → WiFi → Select the corresponding WiFi.
1. Click Creality Cloud online model； 2. Select the model;
3. Download the model;
4. Choos to use parameters； 5. Click "Start" to print.
0.05mm
0.05mm
0
1
0
1
Warm Tips: ① Only 2.4GHz WiFi is applicable to the 3D printer, and it cannot be connect to 5GHz WiFi routers;
② Only WPA-PSK/WPA2-PSK security protocol is applicable to the 3D printer, and other protocols may result in the failure to
connect the printer to WiFi properly. To change the security protocol, users may change it in setting interface of the router.
To Next Page
Loading...
Need help?
General
